Inspection History
|
The inspection history you have selected is displayed below. What appears below the inspection date
are the items that were found to be out of compliance during that inspection,
and each inspection may have zero or more violations. Violations denoted in red represent critical violations.
Conditions posted here and noted on the inspection form represent violations found during the actual
inspection on the date listed. The facility's current condition may be different.
|
Food Facility Details
|
Name |
19TH HOLE LOUNGE |
Address |
4253
REAVIS BARRACKS
RD
|
|
|
SAINT LOUIS, MO 63125-2327 |
|
|
Date
|
Inspection Type
|
Score
|
Expand All
|
03/27/2023
|
ROUTINE INSPECTION
|
97%
|
|
-
-
Observed:
Missing tiles in men's restroom
(6-501.11) PHYSICAL FACILITIES shall be maintained in good repair.
-
-
Observed:
Chlorine test strips are not usable as they are appeared to be blackened
(4-302.14)A test kit or other device that accurately measures the concentration in MG/L of SANITIZING solutions shall be provided.
-
-
Observed:
Ice machine baffle/flip lid is coming off machine. Cannot use duct tape to repair equipment. * REPEAT VIOLATION
(4-501.11) (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1and 4-2.
(B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in
accordance with manufacturer's specifications.
|
08/03/2022
|
ROUTINE INSPECTION
|
99%
|
|
-
-
No paper towels at handsink
(6-301.12) Each HANDWASHING SINK or group of adjacent HANDWASHING SINKS shall be provided with:
(A) Individual, disposable towels;
(B) A continuous towel system that supplies the user with a clean towel; or
(C) A heated-air hand drying device.
Corrected
-
-
Ice machine baffle/flip lid is coming off machine. Cannot use duct tape to repair equipment. * REPEAT VIOLATION
(4-501.11) (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2.
(B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications.
|
08/12/2021
|
ROUTINE INSPECTION
|
98%
|
|
-
-
Ice machine baffle coming off flip lid. Cannot use duct tape to repair items
(4-501.11) (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2.
(B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications
-
-
No thermometer in refrigerator
(4-204.112) (A) In a mechanically refrigerated the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit
|
Search Again | Previous Results